How to Connect Ethernet Cable to Wireless Router? | Improved Network Performance

An Ethernet connection advances your community by increasing connectivity and net speed. While most customers utilize Ethernet cables, there are some situations when strained connections offer faster speeds, more stability, and better performance. If you’d want to know how to connect an Ethernet cable to a wireless router, stick around. This article will provide a fix for this issue. 

Here are some quick steps to connect an Ethernet cable to a wireless router. Let’s see the complete details in the following section.

Step-by-step guide

Some of important tips, which already described in the below section

1. Prepare your equipment

Make sure the device is turned on and the cable is connected if you want your internet to work properly, and locate it in a decent or central area of ​​your home.

2. Locate the Ethernet ports on the Router

Every WiFi router has some ports; some of them are LAN ports, which can be categorized on the back of each router. Likewise, there is a WAN port that usually comes with every Wi-Fi router, so this port is used exclusively for Internet connections in most cases.

It will look something like this.

3. Connect the Ethernet cable to the Router

It’s quite simple to connect an Ethernet wire to a router. Just make sure you have an Ethernet cable and router device first.

An Ethernet cable must be connected and inserted into the router’s LAN port. It is very important to verify that the port is indeed an RJ45 connector.

You have to plug the other end of the Ethernet cable.  

4. Check the network connection

After successfully plugging the cable into your router, you need to check that the connection is working properly.

Router Indicators

Modern wireless routers have small lights like green, blue and red. Most routers have LED indicators near the LAN ports that light up when a device is connected. Make sure the LED for the port you used indicates a successful connection.

Device settings

You should then check your device, make sure it is set to obtain an IP address automatically (if using DHCP) or the static IP settings (if applicable) are correct.

5. Configure network settings (if needed).

As you know, there is no need for additional settings in the network device, as most of the devices will connect automatically. However, if you face problems or need to set up a static IP address , then follow these steps:

For Windows Network Setup

• Firstly, you will open your PC.
• Then press the shortcut from the keyboard (WIN+R).
• After that, you have to open a small box.
• Then you have to type this commond (ncpa.cpl).
• This command will take you directly to the Ethernet settings.
• After that, you have to click on properties setting.
• You then need to make sure that the IP settings are set to Obtain an IP address automatically.

On macOS

• First, you need to go to System Preferences > Network.
• Then select Ethernet from the list on the left.
• Next, you need to make sure that IPv4 is set to use DHCP.

Why connect a wireless router with an Ethernet cable?

The question of why using an Ethernet cable would be beneficial is one that is often asked by everyone:

Stable connection

In general, Ethernet connections are less prone to interference and more stable than wireless connections. Thus, Ethernet cables are preferred by most users.

Faster Speeds

Most people use Ethernet cable for better speed, when they play games etc. because direct Ethernet cable provides reliability and accuracy to its users.

Less interference

Because of the reduced user interference, Ethernet cable is better than wireless Wi-Fi.

Troubleshooting Tips

When you face a slow internet problem, you need to follow the given instructions to fix it.

Check Cable Connections

The Ethernet cable needs to be securely plugged in at both ends.

Restart Devices

Restart your router and connect temporarily to resolve issues.

Verify Router Settings

Check your router’s settings to make sure the LAN ports are enabled and working properly.

Check the cable

Check the cable that you plug into the router side whenever there is a problem with it.

Conclusion

In the modern digital age, having an internet connection is very important, as many tasks cannot be completed without it. So people are forced to establish their own internet connection. But here we discuss that. How to Connect Ethernet Cable to Wireless Router, so its simple, which is already discussed in the above section. Users always prefer to use Ethernet cable for connectivity as it provides better speed than wireless Wi-Fi. Stay with us; we will always try to solve the wireless issue.